-
Development of bearing suppliers and quality control during purchasing
-
Basics of Bearing Technology
-
Failure Analysis
Basics of Bearing Technology
Session I (free)
Introduction: 19th of January 2021, 15:00 Central European Time
• Bearing types
• Cages
• Bearing arrangements
• Interfaces (design requirements)
Session II: Properties I
26th of January 2021, 15:00 Central European Time
• Tolerances (clearance, precision, etc.)
• Lubrication (grease and oil)
• Materials
Session III: Properties II
2nd of February 2021, 15:00 Central European Time
• Internal geometry (profiling, osculation)
• Life calculation acc. to ISO 281
• Sample inspection (including quick testing)
Session IV: Preventive Maintenance
9th of February 2021, 15:00 Central European Time
• Oil sample analysis
• Regular inspection and endoscopy
• Condition monitoring by vibration measurement
Development of bearing suppliers and quality control during purchasing
Session I (free)
Introduction: 16th of February 2021, 15:00 Central European Time
• Motivation
• Definition of quality levels
Session II: Quality Specification
23rd of February 2021, 15:00 Central European Time
• Quality characteristics
• Technical description
Session III: Production
2nd of March 2021, 15:00 Central European Time
• Approach during factory visits and audits
• Requirements for the documentation of production
Session IV: Quality Control
9th of March 2021, 15:00 Central European Time
• Methods for sample inspection and incoming control
• Approach for initial approval
• Concepts for quality control
Failure Analysis
Session I (free): Introduction
16th of March 2021, 15:00 Central European Time
• Methods for inspection
• Examples of failures related to poor lubrication
• Premature failure due to contamination
Session II: Faulty Bearings
23rd of March 2021, 15:00 Central European Time
• Typical failure patterns of faulty bearings related to:
• Crowning
• Cracks
• Poor material
• Undercuts
Session III: Electricity
30th of March 2021, 15:00 Central European Time
• Electric erosion
• White etching cracks
Session IV: Additional causes for failure
6th of April 2021, 15:00 Central European Time
• Premature failure due to faulty installation
• Improper fits
• Shape errors of surrounding parts
• Cage fracture
You can download the registration form and all the seminar details on the following link.
Contact:
Ecem Is
Phone: +49 241 16 91 93 26
E-Mail: [email protected]
www.elgeti-engineering.com
